JBC JTSE-2QA Hot Air Rework Station (no extractors)

The JBC JTSE-2QA is a high powered hot air station for repairing all types of SMDs quickly and safely, including the biggest QFPs and PLCCs.
JBC 230 V - Hot Air Station Without Extractor Desk features two work modes -manual or program- to manage efficiently the temperature and the hot air flow.
Using the menu you can personalize over 20 parameters to help manage the soldering process.
It works with the JT-TA heater and features a USB-B connector for software updates.
It comes with the JT-SD Stand that guarantees the Auto-stop function when the tool is at rest.

Profiles mode

There are two work modes to choose from - manual and profile. In manual mode, the operator can set temperature values and air flow rate depending on the task. In profile model, the operator can set up and edit as many as 25 profiles for temperature and airflow.

Manual mode In manual mode the operator can set temperature values and air flow rate depending on the task.

Profile mode In this mode the operator can set up or edit as many as 25 profiles of temperature and air flow.

Control thermocouple

Users can read the temperature at a specific point on the PCB with the control thermocouple. This helps protect components or a specific area on the PCB, and provides greater precision when regulating the temperature.

There are two work modes available for use with the control thermocouple:

Regulation: the station regulates the air temperature automatically to maintain the External Thermocouple (TC) temperature.

Protection: the station cuts the air supply off when the External Thermocouple (TC) temperature is reached.

Auto-stop function

The auto-stop function is a safety measure which guarantees the heat is automatically cut off when the tool is in the stand. This also means you save power and extend the life of the tip. There is also an auto start feature. When selected, the tool automatically heats up when lifted from the stand.

Product Composition

1 JTSE-UA Hot Air Control Unit
JT Heater Hose Sets
JN2015 Nozzle for JT heater
JN2012 Nozzle for JT heater
JN2020 Nozzle for JT heater
JT-SE Stand for JT heater
PH218 Thermocouple Type K

Product Specifications

Selectable Temperature 150 to 450 ºC (300-840 ºF)
Air flow 5 to 50 SLPM
Temperature profiles: Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored.
Operating modes Heating / Profiles / Cooling
Vacuum 30% / 228 mmHg / 9 inHg

CONNECTIVITY
Type K thermocouple: Can be used both for Control and Protection purposes.
USB-B (rear) Software PC
USB-A (front) Firmware update, Graphics / Profiles management
Robot RS-232 remote control
Pedal Optional tool control
Equipotential bonding Optional connection to EPA

ESD/EOS
ESD safe

POWER SUPPLY
Peak power 700 W
Ambient operating temperture 10 to 50 ºC / 50 to 120 ºF

DIMENSIONS AND WEIGHT
Premium Station 230 x 148 x 160 mm / 4.93 kg.

Download the JBC Tip Catalogue